LIGHT STRIPPING TOOL: Help strip corner and panel.

SINGLE TIE-BREAKER:  designed to break ties easily and quickly.

TRIPLE TIE-BREAKER:  designed to snap ties easily and quickly from 3 different angles. The hexagon allows you to screw or unscrew the bolts on the panel.

ALUMINUM CONCRETE SPREADER:  designed to spread and give a nice finish to concrete

Available in 24″, 30″ et 36″.

STACKING PLATE:  firmly holds the stacked panels. The notch in the plate keeps the tie from moving, providing alignment and stability.

 H  FOR PANELS BRACKET:  designed to overlap your panels to create a higher wall.

 H  BRACKET FOR 2″ x 10″:  To place a beam over the panels.

SCAFFOLDING ADAPTOR FOR 1″ CORNER: designed to be able to install a support scaffolding.

SCAFFOLDING ADAPTOR FOR 2″ x 2″ CORNER: designed to be able to install a support scaffolding.

HINGE CORNER LOCK:  for adjustment and to hold an adjustable corner at the desired angle if needed

TOP WALER FOR 2″ x 4″:  to straighten and align the panel heads in order to obtain a straight concrete surface.

WALL ALIGNER WITH SCREW FOR 2″ x 4″:  used to rectify and solidify the alignment of part of the formwork

STRONGBACK WALER 2″ x 4″:  designed to solidify the wall when you stack panels.

Wall ALIGNER FOR 4″ x 4″ WITH SCREW:  Helps straighten a wall of panels by tightening the screw

ALIGNMENT BRACKET:  use quickly and solidly attaches a rope to the top of the panel to align the wall.

ANCHOR BOLT 1/2″ x 8″: C/W nuts and washer.

SHOULDER BOLT AND SLEEVE: To fix your panels.

LOOP TIE: Available in 6″, 7″, 8″. Others dimensions on requested.

2500 per bundle.

COMMON NAILS: Available in 2″, 3″, 3-1/4″ et 3-1/2″.

50 pounds per boxes.

SHEETS: Box of 500 styrofoam sheets